Squash Court Flooring

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall. 

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.

Plain Squash Court Hard Plaster System Flooring is made under the strict supervision of our experienced professionals using the latest technology and quality raw material. In order to maintain quality standards, these are monitored by our experts at various parameters of quality and performance.

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall.

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall.

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall. 

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall. 

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall.

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall.

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

 

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

 

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

 

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall. 

 

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat    

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall.

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.

We are renowned firm manufacturing widely demanded Squash Court Hard Plaster System Flooring. We have invested substantial resources in exploring the innovative quality of hard plaster system of squash courts, which is highly trusted for assured whiteness and strength.

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall.

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.

We have highly acknowledged organization engaged in presenting a remarkable range of Squash Court Flooring.

TECHNICAL SPECIFICATION OF WOODEN FLOORING:-

The Surface Board:Kiln SeasonedImportedMapleWood surface board finished with 21 mmthick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove.

The Under Frame:Made of commercial quality Fir/Spruce/Pine wood runners of 70 mm X 45 mmtreated with anti-termite solution and fixed on the bottom side with 10 mmthick EPDM air cushioning pads by nails through the two wings at 350 mm clc.

The Installation:Avapor barrier will be placed on the leveled IPS sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapor barrier in perfect level at 350 mm clcin one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap of 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall.

The Finishing:After installation the floor will be machine sanded with floor sander machine and finished with Polyurethane Lacquer. The Game line marking to be carried out in required colors before applying the finish coat.